I fixed the problem: 1. Unplug printer from power source and wait a few minutes. 2. While waiting, restart the computer (I didn't shut down and reboot, just restarted it.) 3. Plug printer back into power source. 4. Do not turn printer on immediately. Instead, hold down the STOP key on the printer and keep it pressed down as you turn the power ...
I have a fairly new and lightly used MF4880dw printer which has ceased responding to all attemps at the few suggested solutions I've found on this and a couple of other sites... ex: Multiple variations on "Power off, unplug, wait, plug in, turn on while holding Stop button" That worked one time, so ...
To try and resolve the error, please turn off the printer, unplug the power cord and leave it out for at least 5 minutes, then plug it back in and turn it back on.
I don't know if anyone still needs this solution but I'll post it here: ***Download Mode*** Waiting means your Cannon printer firmware has somehow been deleted or uninstalled from the printer and the printer is waiting for you to download the firmware it needs to run. Now if this happens you'll need...
Ensure the printer is connected to the computer with a USB cable specifically for printers. The printer doesn’t ship with one, you’ll have to buy or borrow this.
My ImageClass D530 cannot start. It shows "***DOWNLOAD MODE*** Waiting". If connected to computer then it becomes "***DOWNLOAD MODE*** USB Available". No key is functional. Power on/off many times could not solve the problem. Can anyone help me? Thanks.
Solved: Hi, I am forced in part to link my mx350 to the printer by usb cable due to poor nbn coverage, however I am also connected to it wirelessly without issue.
Solved: Hi, I was finally able to download printer Pixma TS3322 to my laptop but now it says Printer status : ERROR. How do I fix this problem? The printer is working
my brand new MG5420 is connected wirelessly (win7/64-bit). Although printer status indicates "ready", when I hit print, I get "error-printing" message. I've tried connecting via USB to run the Canon diagnostics, and everything says 'no problem'. I installed this printer today using the disc that c...
If there is invalid data in the buffer, or sensors are stuck in a particular mode; a message may appear. Follow these steps to reset the printer: 1. Turn the printer off with the Power button. 2. Disconnect the USB cable from the printer. 3. Unplug the printer's power cord for at least ten minutes, and then plug it back in.
